Product Parameters:
MODEL |
KT-900T |
KT-1200T |
KT-1600T |
Rated voltage frequency |
380V 50HZ |
380V 50HZ |
380V 50HZ |
Heating power |
42KW |
52.5KW |
63KW |
Pressurization method |
Cylinder pressurization |
||
Rubber roller diameter |
Double roll double press, 2 sets of 160mm |
||
Bonding temperature |
room temperature -230℃ |
||
Heating zone material |
Nickel-chromium wire mica sheet 5mm thickaluminum profile |
||
Heating zone size/mm |
300*900 |
300*1200 |
3000*1600 |
Maximum use width/mm |
900 |
1200 |
600 |
Conveyor belt adjustment method |
Motor lead screw fully automatic |
||
Bonding speed |
2-18m/min |
||
Conveyor belt |
anti-static seamless belt |
||
Speed control system |
Variable frequency drive Variable frequencymotor |
||
Internal structure |
Straight-line circular tape drive |
||
Installation size/mm |
L5300 W1550 H1550 |
L5300 W1800 H1550 |
L5300 W2200 H1550 |
Wooden box size/mm |
L3000 W1500 H1650 |
L3000 W1800 H1650 |
L3000 W2200 H1650 |
MODEL |
KT-1800T |
KT-2000T |
Rated voltage frequency |
380V 50HZ |
380V 50HZ |
Heating power |
73.5KW |
84KW |
Pressurization method |
Cylinder pressurization |
|
Rubber roller diameter |
Double roll double press, 2 sets of 160mm |
|
Bonding temperature |
room temperature -230℃ |
|
Heating zone material |
Nickel-chromium wire mica sheet 5mm thickaluminum profile |
|
Heating zone size/mm |
3000*1800 |
3000*2000 |
Maximum use width/mm |
1800 |
2000 |
Conveyor belt adjustment method |
Motor lead screw fully automatic |
|
Bonding speed |
2-18m/min |
|
Conveyor belt |
anti-static seamless belt |
|
Speed control system |
Variable frequency drive Variable frequencymotor |
|
Internal structure |
Straight-line circular tape drive |
|
Installation size/mm |
L5300 W2400 H1550 |
L5300 W2600 H1550 |
Wooden box size/mm |
L3000 W2400 H1650 |
L3000 W2600 H1650 |
Applicable Industries
Seamless underwear lamination, seamlessshirt and POLO shirt lamination, spandex lamination wholefabric lamination, leather breathable membrane lamination, carinterior seats, car top lining suede fabric lamination, non-wovenfabric lamination, etc.
Configuration
1. Dual-roll dual-pressure with 160mmdiameter high-temperature resistant silicone rubber rolls.
2.76mm diameter chrome-plated.
3.21 pieces of 5mm thickaluminum profiles with mica sheet heating plates.
4. lmportedfrequency converter for speed control. 5. temperature controllerfor temperature control.
Features
1. The heater is extended to 3meters, with 21 sets of aluminum mica sheet heating plates thathigh-speed bond various hot melt adhesives and difficult-to-bond materials. lt can also use low temperature to bond varioushigh-temperature hot melt adhes, avoiding discoloration anddeterioration of materials due to high temperature.
2. Dual-rolldual-pressure, with 160mm diameter high-temperature resistantrubber rolls and 80mm diameter air cylinder lever pressure, onetime heating and two-time pressure, solving the problem ofdelamination and poor adhesion due insufficient pressure timeduring high-speed operation.
3. All rollers are treated with76mm diameter chrome plating, increasing the flatness of thehigh- belt and solving the problem of thin material wrinkling.
4. 5mm thick aluminum profiles with surface hardness treatment,enhancing the wear resistance of the aluminum heatductionplate, uniform heating and heat conduction of the mica sheetheating plate, and small horizontal temperature difference. Fastheating speed.
5. Thickened machine wall plate integratedwelding base frame is not easy to deform and is more solid anddurable.
6. The motor is equipped with the company's patentedbias correction structure which is easy to adjust and does noteasily run off the belt.
7.lmported temperature control elementsand imported frequency converter for stable speed control andprecise temperature control8. Thickened top cover of 8cm andside cover of 3cm insulation layer, locking the temperature,reducing power consumption, and improving the workshopenvironment temperature.