Product Parameters:
|
Model |
KT-600F-18-2 |
KT-900F-18-2 |
KT-1200F-18-2 |
|
|
Power supply |
3P/380V |
3P/380v |
3P/380v |
|
|
Fixed electricalpower |
Heater |
27kw |
40.5kw |
49.5kw |
|
Motor |
400w |
400w |
400w |
|
|
Fusing width |
600mm |
900mm |
1200mm |
|
|
Belt speed |
16m/mim |
16m/min |
16m/min |
|
|
MAXspeed |
0.6Mpa |
0.6Mpa |
0.6Mpa |
|
|
MAXpressure |
200°C |
200°C |
200°C |
|
|
Heatingtime |
5-32sec |
5-32sec |
5-32sec |
|
|
Model |
KT-1600F-18-2 |
KT-1800F-18-2 |
KT-2000F-18-2 |
|
|
Power supply |
3P/380V |
3P/380v |
3P/380v |
|
|
Fixed electricalpower |
Heater |
54kw |
63kw |
69kw |
|
Motor |
750w |
750w |
750w |
|
|
Fusing width |
1600mm |
1800mm |
2000mm |
|
|
Belt speed |
16m/mim |
16m/min |
16m/min |
|
|
MAXspeed |
0.6Mpa |
0.6Mpa |
0.6Mpa |
|
|
MAXpressure |
200°C |
200°C |
200°C |
|
|
Heatingtime |
5-32sec |
5-32sec |
5-32sec |
|
Features:
1. The heating plate is configured to consist of upper and ower parts, allowing dfferenttemperatures to be set as needed, especialy adjusting the actual bonding temperature according to the type of adhesive material.
2. This device adopts a new seamless Teflon belt, effectively extending the belt's service life.
3. The machine is equipped with a two-stage cooling box.
4. Adopt an internal tension method to prevent residual fabric lining) from adhering to the tensioning shaft.
5. Adopting a new patented Patent No. 202123064083.1) alignment adustmen devce, Adust the bet positon when the devaton correction device's movement is reduced compared to before. Do not add excessive tension to the belt, reducing its load
6. The bet features a dual cleaning device on both the inside and outside, enabling automatic cleaning of both surfaces, thereby extending the belt's service life.
7.Using dual-rol double -pressure thickened pressure rubber rolers.Obtaining unifom and balanced pressure enhances bonding performance
and durability.
