This machine can be widely used in the pressure test of safety shoes, and the jig can be installed to measure the compressive strength of the steel head and the puncture resistance of the sole. Place the steel head of the safety shoe between the upper and lower platens of the machine, and then apply a certain pressure, and then check the lower limit of the steel head to know whether the safety of the toes can be ensured when wearing. Re-testing equipment: EN specification uses gauges to measure the inner gap of the steel head, while ANSIA specification uses a probe to probe into the steel head.

Meet the standards: CAN/CSA-Z195, GB/T 20991-5.5/5.8, ISO 20344

Product Parameters:

1. Sensor capacity: 20kn

2. Strength analysis degree: 1/20000

3. Accuracy: ±1%

4. Display system: Chinese controller, intuitive and easy to operate

5. Compression speed: 5±2mm/min (0～200mm/min stepless speed regulation)

6. Motor: AC variable frequency motor, inverter control

7. Test fixtures: one set of compression/piercing fixtures

8. Printing function: optional

9. Machine size: 82×58×71cm

10. Weight: about 48kg

11. Power supply: AC～220V 50HZ