SERVO ENERGY SAVE PLASTIC INJECTION MOLDING MACHINE KT-460S

Heating power :30.7kW
Machine dimension(LxWxH) :7.98x1.90x2.30m
Oiltank cubage :900L
Machine weight :16t

INQUIRY

Product Details

Product Tags

FEATURES ：

SUPER ENERGY SAVING

Compared with variable pump system, it can save 40% of thepower.Compared with constant flow pump and speed setter. ltcan save 60% of the power (the different kinds of products hasdifferent energy saving effects).

HIGH PRECISION HIGH RESPONSE

The pressure sensor and rotary encoder with high precision andhigh sensitivityachieve pressure,flow closed-loop control, allowsthe repeat precision error to be less than 1%.When servo motorreaches big quantity, the output power just needs 0.05 seconds.

LOW NOISE

The noise is below 78db. Servo motor has almost no noiseduring no operation.

SAVE THE COOLING WATER

No constant flow pump and speed set motor overflow heating.When the temperature of hydraulic oil is lower,the cooling wateris reduced greatly.

Energy-Saving Features

Servo system can collect data signals on the controller at intervals,automaticselection of the most effective mode,accurate pressure operation,flowoutput,and elimination of ineffective energy.

Servo energy-saving injection molding machines:there is no extraenergy consumption due to output volume changes accordingto load alteration.In the phase of holding pressure,servo motorlowers rotate speed and consumes a little of energy.In thephase of cooling,motor doesn,t work and consumes no energy.According to different products,servo energy-saving injectionmolding machines will save20%-80% energy and bring youprominent economic benefit.

Specifications：

1. Model:KT-460S-A-B-C

2. Screw diameter : 70mm-A 75mm-B 80mm-C

3. Shot volume(theoretical) : 1500cm3-A 1723cm3-B 1960cm3-C

4. Injection weight(ps) :1365g-A 1567g-B 1784g-C

5. Injection rate : 344g/s-A 395g/s-B 449g/s-C

6. Injection pressure : 199MPa-A 173MPa-B 152MPa-C

7. Screw speed : 0~160rpm

8. Clamping force : 4600kN

9. Moving Mould-plate stroke : 740mm

10. Space between tie bars(WxH) ：770x770mm

11. Max.Mould height :780mm