Product Parameters：

1. MODEL: KT-E04L3

2. Work station : 4stations

3. Clamping force : 360ton

4. Mold plate size: 350*880*2setsmm

5. Mold height: 100-350mm

6. Mold opening stroke : 420mm

7. Injector : 2set

8. Screw diameter : 65/70/75mm

9. Injection Cylinder : 0250*350mm

10. Max.injection volum : 1150/1340/1540cc

11. Injction pressure : 1200kg/cm2

12. Injection speed : 10cm/sec

13. Screw rotation speed :0-165r.p.m

14. Screw heating power: 17kw

15. Mold plate heating power :74kw

16. Servo motor power :66kw

17. Total power :157kw

18. Machine Oil capacity :800L

19. Machine size ：6565*5000*3040mm

20. Machine weight ：31500kg

 

 

Product Parameters：

1. MODEL: KT-E06L3

2. Work station : 6stations

3. Clamping force : 360ton

4. Mold plate size: 350*880*2 setsmm

5. Mold height: 100-350mm

6. Mold opening stroke : 420mm

7. Injector : 2set

8. Screw diameter : 65/70/75mm

9. Injection Cylinder : 0250*350mm

10. Max.injection volum : 1150/1340/1540cc

11. Injction pressure : 1200kg/cm2

12. Injection speed : 10cm/sec

13. Screw rotation speed :0-165r.p.m

14. Screw heating power: 17kw

15. Mold plate heating power :110kw

16. Servo motor power :66kw

17. Total power :193kw

18. Machine Oil capacity :800L

19. Machine size ：8575*5000*3040mm

20. Machine weight ：39500kg

 

 

Product Parameters：

1. MODEL: KT-E08L3

2. Work station : 8stations

3. Clamping force : 360ton

4. Mold plate size: 350*880*2setsmm

5. Mold height: 100-350mm

6. Mold opening stroke :420mm

7. Injector : 2set

8. Screw diameter : 65/70/76mm

9. Injection Cylinder : 0250*350mm

10. Max.injection volum : 1150/1340/1540cc

11. Injction pressure : 1200kg/cm2

12. Injection speed : 10cm/sec

13. Screw rotation speed :0-165r.p.m

14. Screw heating power: 17kw

15. Mold plate heating power :147kw

16. Servo motor power :66kw

17. Total power :230kw

18. Machine Oil capacity :800L

19. Machine size ：10585*5000*3040mm

20. Machine weight ：47500kg

 

Features:

1.Control System adopts humanized computer operating interface.lt is visible and easy tooperate for the workers.

2.Injection System adopts potentiometer detection match with PLC&PC can control the material injection capacityprecisely.

3.The Injection ejector seat adopts linear slide rail that the injector can move quickly and locate accurately.

4.Mold clamping system adopts Toggle mechanism design that the mold can open rapidly.

5.High mould opening stroke (100mm-350mm)applies to different mould height so the range of products is very wide.

6.Hydraulic Oil system adopts servo motor not only can save electric but also match up with the PLC to control themould clapping system pressure and flow rate accurately so increase the products quality.

7.Using highly efficient insulation material and High power air cooled radiator instead of the traditional water coolingsystem.